Home/Products/Connectivity and accessories/Cables/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos./1635C0,5

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 0.5 m / 1635C0,5

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 0.5 m
1635C0,5
18000540
  • Length: 0.5 m
  • Temperature range: –55 ... +200°C
  • Connection: KIAG 10-32 pos. – KIAG 10-32 pos. (IP65)
Upon request
On request
Certificates and Standards
Degree of protection EN 60529
IP65
Cable properties
Predefined cable length
0.5 m
Interfaces
Connector type
KIAG 10-32 (positive), KIAG 10-32 (positive)

Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 1E13 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.

Loading
Loading