Inicio/Products/Sensores/Sensores de Fuerza/Dinamómetros multicomponente, fuerzas máximas hasta 30 kN, cubierta 140x190 mm/9139AA

Dinamómetro Multicomponente MaxiDyn, 30 kN, Cubierta 140x190 mm / 9139AA

Dinamómetro Multicomponente MaxiDyn, 30 kN, Cubierta 140x190 mm
9139AA
18030434
  • Dinamómetro multicomponente piezoeléctrico con fuerzas máximas Fx, Fy, Fz ±30 kN
  • Cubierta 140x190 mm
  • Frecuencia natural fn (x), fn (y) 2,9 kHz, fn (z) 3 kHz
  • Conector Fischer de brida de 9 polos
Bajo pedido
Bajo pedido
Measuring ranges
Minimum measuring range [kN]
-30 kN
Maximum measuring range [kN]
30 kN
Calibrations
Calibrated range Fx [kN]
0 … 30 kN
Calibrated range Fy [kN]
0 … 30 kN
Calibrated range Fz [kN]
0 … 30 kN
Product type
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Multicomponent dynamometer
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Crosstalk
Maximum crosstalk Fx→Fy
-2 … 2 %
Maximum crosstalk Fx→Fz
-2 … 2 %
Maximum crosstalk Fy→Fx
-2 … 2 %
Maximum crosstalk Fy→Fz
-2 … 2 %
Maximum crosstalk Fz→Fx
-2 … 2 %
Maximum crosstalk Fz→Fy
-2 … 2 %
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±0.5 %FSO
Threshold
<0.01 N
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^13 Ω
Influence quantities
Sensitivity
Fx: -8.2 pC/N, Fy: -4.2 pC/N, Fz: -8.2 pC/N
Certificates and Standards
Degree of protection EN 60529
IP67
Operation and installation
Operating temperature range
-20 … 70 °C
Applications
Cutting processes and machining development, 3C electronics manufacturing
Cable properties
Cable included
No cable included
Interfaces
Connector type
Fischer 104 9-pin (negative)
Dimensions and materials
Weight
12.9 kg
Se trata de un dinamómetro multicomponente para medir los tres componentes ortogonales de una fuerza. Su diseño rígido y robusto, así como su amplio rango de medición, permiten medir grandes fuerzas, por ejemplo en aplicaciones de corte de alto rendimiento.
Carga
Carga