Accueil/Produits/Capteurs/Accéléromètres/Accéléromètres PiezoStar cryogéniques et haute température, 50 ... 250 g/8703A50M1

Accéléromètre PiezoStar, 50 g, isolé de la masse / 8703A50M1

Accéléromètre PiezoStar, 50 g, isolé de la masse
8703A50M1
18010968
  • Accéléromètre isolé de la masse avec sortie IEPE
  • Plage d'accélération : ±50 g
  • Plage de température : -55 ... 165°C
Sur demande
Sur demande
Measuring ranges
Maximum measuring range [g]
Maximum acceleration value you want to measure.
50 g
Product type
Device Type
Accelerometer
Number of Axes
1
Technology
PiezoStar®, Shear
Metrological characteristics
Threshold (acceleration)
Minimum change in the measurand that produces a measurable change in the sensor output, while the change of the measurand takes place slowly and monotonically.
0.0012 g RMS
Thermal Stability
Yes
Electrical properties
Output signal type
Voltage (Piezoelectric, IEPE)
Electrical isolation
Ground isolation
Ground Insulation
Yes
Influence quantities
Sensitivity for Voltage and IEPE Output
100 mV/g
Temperature coefficient of sensitivity (%/°C)
0.004
Dynamical properties
Minimum frequency (±5%) [Hz]
0.5 Hz
Maximum frequency (±5%) [Hz]
10000 Hz
Certificates and Standards
Degree of protection EN 60529
IP68
Operation and installation
Minimal operating temperature [°C]
Minimal static operating temperature.
-54 °C
Maximum operating temperature [°C]
Maximum static operating temperature.
165 °C
Mounting Threaded Hole
Yes
Mounting Adhesive
Yes
Mounting Magnetic
Yes
Mounting type
Threaded hole / Stud, Adhesive / Wax, Magnetic base
Sealing
Hermetic Seal, IP68
High Temperature
Yes
Applications
NVH testing
Interfaces
Connector Type
Side, 10-32 Neg.
Accéléromètre avec une plage de 50 g et une isolation de la terre.
Chargement
Chargement