Accueil/Produits/Capteurs/Capteurs de force/Dynamomètres multicomposants, forces maximales jusqu'à 30 kN, plaque supérieure 140x190 mm/9139AA

Dynamomètre multicomposant MaxiDyn, 30 kN, plaque supérieure 140x190 mm / 9139AA

Dynamomètre multicomposant MaxiDyn, 30 kN, plaque supérieure 140x190 mm
9139AA
18030434
  • Dynamomètre piézoélectrique à plusieurs composants avec forces maximales Fx, Fy, Fz ±30 kN
  • Plaque supérieure 140x190 mm
  • Fréquence propre fn (x), fn (y) 2,9 kHz, fn (z) 3 kHz
  • Connecteur à bride Fischer à 9 broches
Sur demande
Sur demande
Measuring ranges
Minimum measuring range [kN]
-30 kN
Maximum measuring range [kN]
30 kN
Calibrations
Calibrated range Fx [kN]
0 … 30 kN
Calibrated range Fy [kN]
0 … 30 kN
Calibrated range Fz [kN]
0 … 30 kN
Product type
Force sensor type
A dynamometer is a force plate measuring forces and moments.
Multicomponent dynamometer
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Crosstalk
Maximum crosstalk Fx→Fy
-2 … 2 %
Maximum crosstalk Fx→Fz
-2 … 2 %
Maximum crosstalk Fy→Fx
-2 … 2 %
Maximum crosstalk Fy→Fz
-2 … 2 %
Maximum crosstalk Fz→Fx
-2 … 2 %
Maximum crosstalk Fz→Fy
-2 … 2 %
Metrological characteristics
Linearity
Linearity represents the maximum deviation/error between ideal and actual output signal characteristics in relation to the measurand in a specific measuring range. It is expressed in percentage of the range of measurement signal (Full Scale Output).
≤±0.5 %FSO
Threshold
<0.01 N
Electrical properties
Output signal type
Charge (Piezoelectric, PE)
Minimal insulation resistance
10^13 Ω
Influence quantities
Sensitivity
Fx: -8.2 pC/N, Fy: -4.2 pC/N, Fz: -8.2 pC/N
Certificates and Standards
Degree of protection EN 60529
IP67
Operation and installation
Operating temperature range
-20 … 70 °C
Applications
Cutting processes and machining development, 3C electronics manufacturing
Cable properties
Cable included
No cable included
Interfaces
Connector type
Fischer 104 9-pin (negative)
Dimensions and materials
Weight
12.9 kg
Il s'agit d'un dynamomètre multicomposantes permettant de mesurer les trois composantes orthogonales d'une force. La conception rigide et robuste ainsi que la grande plage de mesure permettent de mesurer des forces importantes, par exemple dans les applications de coupe à haute performance.
Chargement
Chargement