Página inicial/Produtos/Conectividade e acessórios/Cabos/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos./1641B2

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 2 m / 1641B2

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 2 m
1641B2
18000554
  • Length: 2 m
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. 90° (IP65)
  • Amplifier connector: BNC pos. (IP40)
A pedido
A pedido
Mechanical properties
Bending radius [mm]
5 mm
Certificates and Standards
Degree of protection EN 60529
IP65, IP40
Operation and installation
Temperature range
-55 … 200 °C
Cable properties
Predefined cable length
2 m
Interfaces
Connector type
KIAG 10-32 (positive, 90°), BNC (positive)

Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 10E13 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.

Loading
Loading