线缆

压电传感器和电荷放大器的必备品：来自奇石乐的高绝缘线缆。

与传统同轴线缆不同，高绝缘线缆的最内层线芯采用聚四氟乙烯绝缘。这使得漂移效应降至最低。特殊的石墨涂层也能将三电效应降至最低。外绝缘层有多种型号，每种型号都具有不同的特性。

Coaxial cables for connection between sensor and charge amplifier (e.g.1-component force sensors, industrial production or automation).

Connection cables for piezoelectric sensors, KIAG 10-32 pos. to BNC pos.

Connection cables for piezoelectric sensors, KIAG 10-32 pos. to BNC pos.

Connection cable for piezoelectric sensors, KIAG 10-32 pos. to BNC pos., 0.5 m

Connection cable for piezoelectric sensors, KIAG 10-32 pos. to BNC pos., 1 m

Coaxial cables for distance extension between sensor and charge amplifier (e.g.1-component force sensors, industrial production or automation).

Extensions for high insulating cables, KIAG 10-32 pos. to KIAG 10-32 pos.

Extensions for high insulating cables, KIAG 10-32 pos. to KIAG 10-32 pos.

Extension for high insulating cables, KIAG 10-32 pos. to KIAG 10-32 pos., 0.5 m

Extension for high insulating cables, KIAG 10-32 pos. to KIAG 10-32 pos., 1 m

These connecting cables are low-noise and high-insulation coaxial cables for use in drag-chains. Owing to their own properties, the cables are especially well suited for dynamic use.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, highly flexible, KIAG 10-32 pos. - KIAG 10-32 pos., 1 m

Connecting cable for piezoelectric sensors, highly flexible, KIAG 10-32 pos. - KIAG 10-32 pos., 2 m

Coaxial cables used for connection between amplifer and DAQ system or between a sensor with a BNC connector and amplifier.

Output cables for signal transmission, BNC pos. to BNC pos.

Output cables for signal transmission, BNC pos. to BNC pos.

Output cable for signal transmission, BNC pos. to BNC pos., 0.5 m

Output cable for signal transmission, BNC pos. to BNC pos., 10 m

Separation cables used for triaxial measurements in multi-axis force sensors.

Separation cables for piezoelectric sensors, V3 pos. to 3 x BNC pos.

Separation cables for piezoelectric sensors, V3 pos. to 3 x BNC pos.

Separation cable for piezoelectric sensors, V3 pos. to 3 x BNC pos., 1 m

Separation cable for piezoelectric sensors, V3 pos. to 3 x BNC pos., 2 m

These connecting cables are suitable for multicomponent dynamometers thanks to high insulation (10^13 Ω) and metal sheath, 8 conductors.

Connecting cables for multicomponent dynamometers, 8-wire, Fischer flange 9-pole pos.

Connecting cables for multicomponent dynamometers, 8-wire, Fischer flange 9-pole pos.

Connecting cable for multicomponent dynamometers, 8-wire, with metal sheath, Fischer flange 9-pole pos., 5m

Connecting cable for multicomponent dynamometers, 8-wire, with braided steel, Fischer flange 9-pole pos., 5m

These are green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 2 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 1 m

Coaxial cables for connection between sensor and charge amplifier (e.g.1-component force sensors, industrial production or automation).

Connection cables for piezoelectric sensors, KIAG 10-32 pos. to TNC pos.

Connection cables for piezoelectric sensors, KIAG 10-32 pos. to TNC pos.

Connection cable for piezoelectric sensors, KIAG 10-32 pos. to TNC pos., 0.5 m

Connection cable for piezoelectric sensors, KIAG 10-32 pos. to TNC pos., 1 m

These connecting cables are for multicomponent dynamometers with a high insulation (10^13 Ω) and metal sheath. They have 3 conductors.

Connecting cables for multicomponent dynamometers, 3-wire, Fischer flange 9-pole pos.

Connecting cables for multicomponent dynamometers, 3-wire, Fischer flange 9-pole pos.

Connecting cable for multicomponent dynamometers, 3-wire, with metal sheath, Fischer flange 9-pole pos., 5m

Connecting cable for multicomponent dynamometers, 3-wire, with braided steel, Fischer flange 9-pole pos., 5m

Low-noise, oil-resistant, high-insulation coaxial cables with flexible mechanical protection. Owing to their properties, the cables are ideal for use in harsh machinery environments.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., 2 m

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., 3 m

Connection cables used for triaxial measurements in multi-axis force sensors.

Connection cables for piezoelectric sensors, V3-B pos. to Fischer 104 pos.

Connection cables for piezoelectric sensors, V3-B pos. to Fischer 104 pos.

Connection cable for piezoelectric sensors, V3-B pos. to Fischer 104 pos., 1 m

Connection cable for piezoelectric sensors, V3-B pos. to Fischer 104 pos., 2 m

Separation cables used for triaxial measurements in multi-axis force sensors.

Separation cables for piezoelectric sensors, V3-A pos. to 2 x BNC pos.

Separation cables for piezoelectric sensors, V3-A pos. to 2 x BNC pos.

Separation cable for piezoelectric sensors, V3-A pos. to 2 x BNC pos., 2 m

Separation cable for piezoelectric sensors, V3-A pos. to 2 x BNC pos., custom length

Need a consultation?

Our experts are just a click away

Frequently asked questions

奇石乐有哪些类型的电缆？

奇石乐提供多种电缆，包括高绝缘和低释气电缆。

使用奇石乐的高绝缘电缆有什么好处？

即使在恶劣的环境中，奇石乐的高绝缘电缆也能提供可靠、准确的数据传输。同时还具有耐用性和抗干扰性。

奇石乐如何确保测量电缆的正确安装？

奇石乐提供全面的安装服务，包括现场支持和针对不同应用的定制解决方案。我们的专家可确保最佳性能和准确性。