ComoNeo 和 ComoScout - 过程监控系统

通过 ComoNeo，奇石乐提供了一个可实现注塑生产网络化的过程监控系统。

持续的数字化可提高注塑生产的产品质量和成本效益。ComoNeo 和 ComoScout 过程监控系统可确保新用户和经验丰富的用户都能精确、高效地监控其过程。

ComoNeo is a process monitoring system which allows for – based on cavity pressure and mold temperatures – optimization, monitoring and documentation of injection molding processes.

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 2 x 4-channel and 8 temperature sensors

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 1 x 8-channel and 8 temperature sensors

The ComoNeo and ComoScout process monitoring and control systems can be controlled via an optional 15.6" capacitive touch display.

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

For cable extension in multi-cavity mold pressure measurement. Used with multi-channel connectors (e.g type 1710b - 8 channel).

Extensions for cavity pressure sensors, Fischer 104 pos. to Fischer 104 neg.

Extensions for cavity pressure sensors, Fischer 104 pos. to Fischer 104 neg.

Extension for cavity pressure sensors, Fischer 104 pos. to Fischer 104 neg., 1 m

Extension for cavity pressure sensors, Fischer 104 pos. to Fischer 104 neg., 2 m

For cable extension in multi-cavity mold pressure measurement. Used with multi-channel connectors (e.g type 1708b - 4 channel).

Extensions for cavity pressure sensors, Fischer 103 pos. to Fischer 103 neg.

Extensions for cavity pressure sensors, Fischer 103 pos. to Fischer 103 neg.

Extension for cavity pressure sensors, Fischer 103 pos. to Fischer 103 neg., 1 m

Extension for cavity pressure sensors, Fischer 103 pos. to Fischer 103 neg., 2 m

For connecting several pressure sensors (4) with charge amplifier or ComoNeo.

Separation cables for cavity pressure sensors, Fischer 103 pos. to 4xBNC pos.

Separation cables for cavity pressure sensors, Fischer 103 pos. to 4xBNC pos.

Separation cable for cavity pressure sensors, Fischer 103 pos. to 4xBNC pos., 0.5 m

Separation cable for cavity pressure sensors, Fischer 103 pos. to 4xBNC pos., 2 m

This inductive proximity switch is a device to connect a trigger signal to the ComoNeo process monitoring system.

Inductive proximity switch including connecting cable, 5 m

Inductive proximity switch including connecting cable, 5 m

Inductive proximity switch to connect to ComoNeo including connecting cable, 5 m

These adapter boxes are used to conventiently connect different types of cavity pressure sensors (single-channel, multi-channel) with ComoNeo.

Adapter boxes for connecting cavity pressure sensors to ComoNeo, single and multi-channel

Adapter boxes for connecting cavity pressure sensors to ComoNeo, single and multi-channel

Adapter box for connecting cavity pressure sensors to ComoNeo, single- to multi-channel technology, 4 channels to 4 x 1 channel BNC

Adapter box for connecting cavity pressure sensors to ComoNeo, single- to multi-channel technology, 8 channels to 8 x 1 channel BNC

Power supply for ComoNeo and maXYmos with country specific power cord

Power Supply for ComoNeo process monitoring system and maXYmos

Power Supply for ComoNeo process monitoring system and maXYmos

Power supply for ComoNeo process monitoring system and maXYmos

This connecting cable for digital or analog signals links the ComoNeo to the injection molding machine with a 9 or 15-pole connector and bare ends; length is freely configurable between 1 and 15 meters.

Connecting cables, from ComoNeo to injection molding machine

Connecting cables, from ComoNeo to injection molding machine

Connecting cable, from ComoNeo to injection molding machine, 9-pole (female) with bare ends, 7 m

Connecting cable, from ComoNeo to injection molding machine, 15-pole (female) with bare ends, 7 m

These adapter cables bridge single channel output and 4-channel input (5887A1 only).

Connection cables for cavity pressure sensors, Fischer 102 SE pos. to Fischer 103 neg.

Connection cables for cavity pressure sensors, Fischer 102 SE pos. to Fischer 103 neg.

Connection cable for cavity pressure sensors, Fischer 102 SE pos. to Fischer 103 neg., 5 m

Connection cable for cavity pressure sensors, Fischer 102 SE pos. to Fischer 103 neg., 2 m

Process monitoring with ComoScout is ideal for injection molders' retrofit and entry-level needs.

Process monitoring and control system ComoScout for plastic injection molding processes

Process monitoring and control system ComoScout for plastic injection molding processes

Process monitoring and control system ComoScout for plastic injection molding processes with interface for 20 Voltage signals

Screenshot of ComoNeo software

Add-on software products for ComoNeo plastics process monitoring and control system

Add-on software products for ComoNeo plastics process monitoring and control system

ComoNeoMERGE add-on software product for ComoNeo plastics process monitoring and control system

ComoNeoSWITCH add-on software product for ComoNeo plastics process monitoring and control system