チャージアンプ

キスラーは、圧電計測技術のあらゆる応用分野に対応するチャージアンプを幅広く提供しています。

チャージアンプは、圧電センサから発生する非常に低い電荷の信号を、比例した電圧信号（ボルト）に変換する電荷変換器です。チャージアンプの発明を起源とするキスラーは、あらゆる用途に対応する膨大な種類のチャージアンプを提供しています。

These 1-channel laboratory charge amplifiers are suitable for generic measurement applications with piezoelectric sensors in the laboratory environment.

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, desktop version, 115 V

ご要望に応じて

ご要望に応じて

Laboratory charge amplifier, 1-channel, desktop version, 230 V

ご要望に応じて

ご要望に応じて

The MiniAmp single channel, industrial charge amplifiers convert the charge signal from piezoelectric sensors into an inverted proportional voltage signal.

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifier MiniAmp, high range, ±100000 pC

ご要望に応じて

ご要望に応じて

Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC

ご要望に応じて

ご要望に応じて

These excellent charge amplifier modules are suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric sensors.

Plug-in units for 5080A charge amplifier, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Plug-in units for 5080A charge amplifier, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Plug-in unit for 5080A charge amplifier, 1-channel, low noise, charge input

ご要望に応じて

ご要望に応じて

Plug-in unit for 5080A charge amplifier, 1-channel, low noise, charge and Piezotron (IEPE) input

ご要望に応じて

ご要望に応じて

These measurement modules for the KiDAQ data acquisition system (DAQ) are for piezoelectric sensors (charge amplifier).

Measurement modules for piezoelectric sensors (charge amplifier)

Measurement modules for piezoelectric sensors (charge amplifier)

Measurement module KiDAQ for piezoelectric sensors (charge amplifier), Portable

ご要望に応じて

ご要望に応じて

Measurement module KiDAQ for piezoelectric sensors (charge amplifier), Rack

ご要望に応じて

ご要望に応じて

These charge amplifiers for low-noise applications are also suitable for engine combustion measurements.

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, low noise, desktop version, 230 V, BNC

ご要望に応じて

ご要望に応じて

Laboratory charge amplifier, 1-channel, low noise, desktop version, 115 V, BNC

ご要望に応じて

ご要望に応じて

These smart amplifiers combine analog and digital communication technology, thus paving the way for Industry 4.0.

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifier with IO-Link (mICA), ±500 pC

ご要望に応じて

ご要望に応じて

Miniature industrial charge amplifier with IO-Link (mICA), ±5000 pC

ご要望に応じて

ご要望に応じて

The miniature charge amplifiers convert the electrical charge signals yielded by piezoelectric sensors into inverted proportional voltage. The rugged metal housing covers a degree of protection from IP40 up to IP65 to meet industrial requirements.

Miniature industrial charge amplifiers with peak detection and switchable measuring ranges

Miniature industrial charge amplifiers with peak detection and switchable measuring ranges

Miniature industrial charge amplifier with peak detection, range ratio 10:1, max ±50000 pC, TNC neg.

ご要望に応じて

ご要望に応じて

Miniature industrial charge amplifier with peak detection, range ratio 10:1, max ±50000 pC, BNC neg.

ご要望に応じて

ご要望に応じて

These 1-channel inline charge voltage converters allow the operation of charge sensors on an IEPE-compatible data acquisition system.

Inline charge voltage converters, 1-channel

Inline charge voltage converters, 1-channel

Inline charge voltage converter, 1-channel, gain 1 mV/pC

ご要望に応じて

ご要望に応じて

Inline charge voltage converter, 1-channel, gain 0.5 mV/pC

ご要望に応じて

ご要望に応じて

The industrial charge amplifiers for manufacturing applications (ICAM) convert a charge signal into an inverted low-impedance analog signal.

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V

ご要望に応じて

ご要望に応じて

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, TNC neg., voltage output ±10 V

ご要望に応じて

ご要望に応じて

The digital industrial charge amplifiers are universal devices for piezoelectric sensor signals which allow reliable and precise capture of dynamic and quasi-static processes on modern PLC systems via EtherCat, Ethernet/IP or ProfiNet.

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifier (dICA), 4-channel, EtherCat

ご要望に応じて

ご要望に応じて

Digital industrial charge amplifier (dICA), 2-channel, EtherCat

ご要望に応じて

ご要望に応じて

This excellent charge amplifier is suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric dynamometers.

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC

ご要望に応じて

ご要望に応じて

These multichannel charge amplifiers convert the charge signal from piezoelectric cavity pressure sensors and the signal from thermocouples into a proportional voltage signal or a digital signal according to EUROMAP 75 with Varan real time protocol. These amplifiers have been developed for industrial use with injection molding machines.

Multichannel charge amplifiers, voltage amplifiers, ±2000 to ±20000 pC

Multichannel charge amplifiers, voltage amplifiers, ±2000 to ±20000 pC

Analog charge amplifier for injection molding, 1-channel, FSO pC max. ±5000 ... ±20000

ご要望に応じて

ご要望に応じて

Analog charge amplifier for injection molding, 2-channel, FSO pC max. ±5000 ... ±20000, 2 temperature sensor inputs

ご要望に応じて

ご要望に応じて

Need a consultation?

Our experts are just a click away

Frequently asked questions

What is the purpose of a charge amplifier?

A charge amplifier converts electrical charge signals into low impedance voltage signals for accurate measurement and analysis.

Can charge amplifiers be used in harsh environments?

Yes, Kistler's charge amplifiers are designed to withstand extreme temperatures, shock, and vibration, making them suitable for use in challenging industrial and laboratory environments.

How can I ensure proper maintenance of my charge amplifier?

Regular cleaning and calibration are key for optimal performance. Refer to the user manual for specific instructions and recommended intervals.