토크 센서

정확하고 강력한: 키슬러의 토크 센서.

대학 및 산업계에서는 기초 연구 또는 품질 보증을 위해 Kistler의 토크 센서로 드라이브, 변속기 및 펌프의 동력 및 마찰 값을 정확하게 정의할 수 있습니다. 스트레인 게이지 기술(DMS)은 회전축의 측정과 장기 동적 및 정적 측정을 위한 강력한 솔루션입니다. 최고의 정밀도, 가장 견고한 구조 및 고온 안정성: 이러한 자산 덕분에 DMS 센서는 가장 까다로운 작업도 수행할 수 있습니다. 압전 반응 토크 센서는 탁월한 과부하 보호, 높은 신호 해상도 및 넓은 주파수 범위와 같은 확실한 기능을 제공합니다. 형상, 온도 범위 또는 동역학으로 인해 조건이 까다로운 측정 작업에 이상적입니다.

Torque shaft sensors with integrated speed and high resolution angle of rotation measuring system

Shaft torque sensors, dual range torque transducers (measuring ranges 0.2 Nm to 5 kNm)

Shaft torque sensors, dual range torque transducers (measuring ranges 0.2 Nm to 5 kNm)

Shaft torque sensor, dual range torque transducer (measuring ranges from 0.2 Nm to 5 kNm)

Shaft torque sensor, dual range torque transducer (measuring ranges from 2 Nm to 5 kNm)

The torque flange sensors of type 4550A come with integrated speed measurement and high resolution angle of the rotation measuring system. The analog and digital interfaces provide maximum flexibility and easy integration into various test bench environments.

Torque measuring flange system KiTorq Rotor, measuring ranges 100 to 10000 Nm

Torque measuring flange system KiTorq Rotor, measuring ranges 100 to 10000 Nm

Torque measuring flange system KiTorq Rotor, measuring ranges from 100 to 10000 Nm

Torque sensors Type 4502A are strain gauge based non-contact shaft torque transducers. They are optionally available with an integrated encoder.

Shaft torque sensors Mini-Smart, torque transducers (measuring ranges 0.5 Nm to 1 kNm)

Shaft torque sensors Mini-Smart, torque transducers (measuring ranges 0.5 Nm to 1 kNm)

Shaft torque sensor Mini-Smart, torque transducer (measuring ranges from 0.5 Nm to 1 kNm)

Torque sensors of Type 4520A operate on the strain gage principle and supply an analog output signal of ±0 ... 10 VDC which is transmitted without contact.

Shaft torque sensors, basic line torque transducers (measuring ranges 1 to 1000 Nm)

Shaft torque sensors, basic line torque transducers (measuring ranges 1 to 1000 Nm)

Shaft torque sensor, basic line torque transducer (measuring ranges from 1 to 1000 Nm)

The KiTorq evaluation unit (Stator Type 4541A) supplies the KiTorq rotor with power and receives the measured values contact-free.

Evaluation instrument KiTorq Stator for torque measuring flange system

Evaluation instrument KiTorq Stator for torque measuring flange system

Evaluation instrument KiTorq Stator for all N1 (60 pulses) rotors

Evaluation instrument KiTorq Stator for all N2 (60 pulses + Z-pulse) rotors

The KiTorq evaluation unit (Stator Type 4542A) supplies the KiTorq rotor with power and receives the measured values contact-free.

Evaluation instrument KiTorq Stator for torque measuring flange system, with Fieldbus and Ethernet interfaces

Evaluation instrument KiTorq Stator for torque measuring flange system, with Fieldbus and Ethernet interfaces

Evaluation instrument KiTorq Stator for all N1 (60 pulses) rotors, with PROFIBUS interface

Evaluation instrument KiTorq Stator for all N1 (60 pulses) rotors, with PROFINET (RT/IRT) interface

The torque flange sensors of type 4551A come with integrated speed measurement and high resolution angle of the rotation measuring system. The analog and digital interfaces provide maximum flexibility and easy integration into various test bench environments.

Torque measuring flange system KiTorq Rotor, measuring ranges 50 to 5000 Nm

Torque measuring flange system KiTorq Rotor, measuring ranges 50 to 5000 Nm

Torque measuring flange system KiTorq Rotor, measuring ranges from 50 to 5000 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V.

Torque sensors with fixed measuring shaft

Torque sensors with fixed measuring shaft

T-Sensor 5413-1030/1 1N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 1 Nm

T-Sensor 5413-1030/5 5N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 5 Nm

Torque sensors Type 4501A use high-reliability slip-rings to transfer power and signal to and from the rotating strain-gaged shaft. Industry standard mV/V output allows use with standard strain gage equipment.

Shaft torque sensors, torque transducers with slip ring transmission (measuring ranges 2 Nm to 1 kNm)

Shaft torque sensors, torque transducers with slip ring transmission (measuring ranges 2 Nm to 1 kNm)

Shaft torque sensor, torque transducer with slip ring transmission (measuring ranges from 2 Nm to 1 kNm)

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft

Torque sensors with rotating measuring shaft

T-Sensor 5413-1100/1 1N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 1 Nm

T-Sensor 5413-1100/5 5N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 5 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft and hex connection

Torque sensors with rotating measuring shaft and hex connection

T-Sensor 5413-1151/5 5N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 5 Nm

T-Sensor 5413-1151/10 10N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 10 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft in slim design

Torque sensors with rotating measuring shaft in slim design

T-Sensor 5413-1160/1 1N·m 1/4"

Torque sensor in slim design, with cable, nominal value 1 Nm

T-Sensor 5413-1160/2 2N·m 1/4"

Torque sensor in slim design, with cable, nominal value 2 Nm

Need a consultation?

Our experts are just a click away

Frequently asked questions

Kistler의 토크 센서를 사용하면 어떤 산업에서 이점을 얻을 수 있을까요?

Kistler의 토크 센서는 자동차, 항공우주 및 제조와 같은 산업에 이상적이며 다양한 응용 분야에 정확하고 신뢰할 수 있는 측정값을 제공합니다. 토크 측정에 필요한 첨단 기술을 믿으세요.

Kistler의 토크 센서는 정적 및 동적 측정에 모두 적합합니까?

예, Kistler의 토크 센서는 정적 및 동적 측정을 모두 처리하도록 설계되어 다양한 테스트 시나리오에 다용도로 사용할 수 있습니다. Kistler의 센서는 정확하고 반복 가능한 결과를 제공하여 애플리케이션에 신뢰할 수 있는 데이터를 보장합니다.

Kistler의 샤프트 토크 센서를 사용하면 어떤 이점이 있나요?

샤프트 토크 센서는 높은 정확도, 견고한 설계, 손쉬운 통합 등 다양한 이점을 제공합니다. 또한 열악한 환경에도 적합하며 높은 토크 수준을 처리할 수 있습니다. 정확하고 신뢰할 수 있는 측정을 위해 Kistler 센서를 사용하세요.