충돌 테스트 센서

모든 유형의 더미, 충돌테스트 벽 및 사용 중인 테스트 차량에 첨단 충돌 센서(더미 내 DTI로 통합 가능)를 공급합니다.

NHTSA, IIHS 및 EuroNCAP에 따라 모든 유형의 더미에 대해 가속도, 힘 및 토크 센서(더미 내 DTI로 통합 가능)와 같은 고급 충돌 센서를 테스트 차량에 사용할 수 있도록 공급합니다.

The strain gauge dummy load cells of family Type M55122A are designed to measure the force in the area of knee clevare of the crash test dummy HIII-95% (HM).

Strain gauge load cells for crash test dummies, knee clevis, HIII-95th

Strain gauge load cells for crash test dummies, knee clevis, HIII-95th

Load cell for crash test dummies, knee clevis, HIII-95th

These are single-axis length measuring sensors for use in crash test dummies of type Q10 (QA) child dummy. They are applicable only in combination with a corresponding mechanical apparatus and additional sensors.

Deformation sensors KIR-TRACC, thorax rib compression measurement, Q10 child dummy

Deformation sensors KIR-TRACC, thorax rib compression measurement, Q10 child dummy

Deformation sensor KIR-TRACC, thorax rib compression measurement, Q10 child dummy

These are single-axis length measuring sensors for use in crash test dummies of type WorldSID (WS) child dummy. They are applicable only in combination with a corresponding mechanical apparatus and additional sensors.

Deformation sensors KIR-TRACC, shoulder and thorax rib compression measurement, WorldSID-50th

Deformation sensors KIR-TRACC, shoulder and thorax rib compression measurement, WorldSID-50th

WS-50 KIR-TRACC

Deformation sensor KIR-TRACC, shoulder and thorax rib compression measurement, WorldSID-50th

The strain gauge dummy load cells of the family Type M55395A are designed to measure forces and moments in the area of upper tibia of the crash test dummy THOR-M (TH).

Strain gauge load cells for crash test dummies, lower tibia, THOR-50M

Strain gauge load cells for crash test dummies, lower tibia, THOR-50M

Load cell for crash test dummies, five-axial, lower tibia, THOR-50M, THOR-LX

The strain gauge dummy load cells of the family Type M573A6 are designed to measure forces and moments in the area of lumbar spine of the crash test dummy HIII-5% (HF).

Strain gauge load cells for crash test dummies, lumbar spine, HIII-5th, sixaxial

Strain gauge load cells for crash test dummies, lumbar spine, HIII-5th, sixaxial

Load cell for crash test dummies, six-axial, lumbar spine, HIII-5th

The piezoelectric SmartCrash force measuring element with integrated electronics is able to measure three orthogonal components Fx, Fy and Fz of dynamic forces in any direction. It is predestinated for measuring high dynamic impact forces e.g. during crash test procedures for automotive R&D.

Piezoelectric force measuring elements, SmartCrash system, with digital data output

Piezoelectric force measuring elements, SmartCrash system, with digital data output

Piezoelectric SmartCrash force measuring element, standard, 125x125 mm, 12.1 kg

Piezoelectric SmartCrash force measuring element, pole, 125x125 mm, 12.1 kg

The piezoelectric SmartCrash force measuring element with integrated electronics is able to measure three orthogonal components Fx, Fy and Fz of dynamic forces in any direction. It is predestinated for measuring high dynamic impact forces e.g. during crash test procedures for automotive R&D.

Piezoelectric lightweight force measuring elements, SmartCrash system, with digital data output

Piezoelectric lightweight force measuring elements, SmartCrash system, with digital data output

Piezoelectric SmartCrash force measuring element, lightweight, 125x125 mm, 12.1 kg

The piezoelectric SmartCrash force measuring element with integrated electronics is able to measure three orthogonal components Fx, Fy and Fz of dynamic forces in any direction. It is predestinated for measuring high dynamic impact forces e.g. during crash test procedures for automotive R&D.

Piezoelectric corner force measuring elements, SmartCrash system, with digital data output

Piezoelectric corner force measuring elements, SmartCrash system, with digital data output

Piezoelectric SmartCrash force measuring element R150, corner, radius 150 mm, 12.1 kg

The SmartCrash standard segments with triaxial force measuring elements and integrated electronics for data acquisition and storage were developed to measure forces during vehicle crash tests for full width or medium overlap (40%) configurations.

Standard crash wall segments, SmartCrash system, triaxial force measuring elements

Standard crash wall segments, SmartCrash system, triaxial force measuring elements

SmartCrash crash wall standard segment with triaxial force measuring elements (DTI)

The SmartCrash overlap segments with triaxial force measuring elements and integrated electronics for data acquisition and storage were developed for force measurements during vehicle crash tests for small overlap (25%) configuration.

Small overlap crash wall segments, SmartCrash system, triaxial force measuring elements

Small overlap crash wall segments, SmartCrash system, triaxial force measuring elements

SmartCrash crash wall small overlap segment with triaxial force measuring elements (DTI)

The SmartCrash pole segment with triaxial force measuring elements and integrated electronics for data acquisition and storage was developed to measure forces during vehicle crash tests for side impact.

Crash wall pole segments, SmartCrash system, triaxial force measuring elements

Crash wall pole segments, SmartCrash system, triaxial force measuring elements

SmartCrash crash wall pole segment with triaxial force measuring elements (DTI)

The strain gauge dummy load cells of family Type M501A1A are designed to measure the force in the area of femur of the crash test dummy HIII-6 (Y7).

Strain gauge load cells for crash test dummies, femur, HIII-6-year-old child

Strain gauge load cells for crash test dummies, femur, HIII-6-year-old child

Load cell for crash test dummies, femur, HIII-6-year-old child