홈/제품/연결 및 액세서리/케이블/Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos./1641B1

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 1 m / 1641B1

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 1 m
1641B1
18000553
  • Length: 1 m
  • Temperature range: –55 to +200°C
  • Sensor connection: KIAG 10-32 pos. 90° (IP65)
  • Amplifier connector: BNC pos. (IP40)
요청 시
요청 시
Mechanical properties
Bending radius [mm]
5 mm
Certificates and Standards
Degree of protection EN 60529
IP65, IP40
Operation and installation
Temperature range
-55 … 200 °C
Cable properties
Predefined cable length
1 m
Interfaces
Connector type
KIAG 10-32 positive, 90°, BNC positive

Green, single-wire, high insulation, PFA based cable (ø2 mm) for sensors with KIAG 10-32 neg. connector. Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater than 10E13 Ω throughout the measuring chain. Only low noise coaxial cables that produce very little triboelectricity during movement may be used. The connectors must be robust, sealed and resistant to dirt.

로딩 중
로딩 중